1×6 Jende Diamond Sharpening Stone Plates are available in 80, 120, 300, 600, and 1200 grits. These plates are ideal for making repairs and edge reprofiling, and work on all steel types and ceramic blades. They are made to our specs, and the highest quality of the electroplating means no diamonds will pry off during use. Mounted to a standard 1×6 blank, these plates are compatible with all Jende JIGS, Edge Pro, TSProf and Hapstone sharpening systems, and with the Wicked Edge Uni Stone Holder Paddles. Clean and let air dry between use. They can be used wet or dry. 80 Grit Diamond Stone is a VERY aggressive, extra extra coarse diamond plate used for serious profiling, repairs, and initial sharpening. If you have material to hog off or a serious chip or edge damage to repair, this is the ultimate coarse grit diamond stone to use. 120 Grit Diamond Stone is the default grit to start almost every sharpening adventure with. It’s an aggressive, extra coarse diamond plate used for serious profiling, repairs, and initial sharpening. 300 Grit Diamond Stone is a coarse diamond plate used for minor profiling, repairs, and touching up of edges. It works best when used after the 120 grit and before the 600 grit in a progression. 600 Grit Diamond Stone is a medium/medium fine diamond plate used for minor repairs and touching up edges. 1200 Grit Diamond Stone is a fine diamond plate used for touching up of edges, establishing a working sharp edge and preparing an edge for further refinement. 5 Most Common FAQs for this Product Question – What is a 1×6 Jende Diamond Sharpening Plate used for? Answer – 1×6 Jende Diamond Sharpening Plate is used to sharpen and flatten knives, tools, and other cutting edges. Question – Are Jende Diamond Plates suitable for all kinds of steel? Answer – Yes, they work well on all types of steel, including very hard ones. Question – Do I need to use oil or water with the diamond plate? Answer – No, Jende Diamond Plates are used dry or with just a little water for cleaning.
